forums.ps2dev.org

data is a pointer and it looks like there is no memory allocated.
so, before you can use memset you have to malloc some memory to the pointer.

the testing version has no gui yet... :-(

i don't know windows but without mfc/spes it should be the same... just linux.
mfc/spe programming is not difficult at all once you've understood the concept.

Kali wrote:i hope for 720p and 1080p playback :D
hd video on xmb support is limited, i have to encode ~60% of the video, and other ~40% need only to change the container :/

for that the mpeg2 decoder is probably the bottleneck.

You need to specify the SDL driver mplayer -vo sdl:driver=PS3 moviefile Seems to be working for me. I say seems to be because the PS3 is currently headless - without the PS3 driver I see mplayer with ~100% cpu utilisation. With the above, I see ~80% CPU (fluctuating) and two SPU processes l...

> last week I posted a patch to this list that contained a basic > impementation > of a framebuffer driver with acceleration on local SPEs. Thank you very much! I've applied your patch to subversion. See ya, -Sam Lantinga, Founder and President, Galaxy Gameworks LLC i think it's in sdl-1.2

according to a post on the SDL mailing list Cell support has been integrated into the SDL svn.
this should speed up media players like mplayer, xine, etc. quite a bit.
has anybody already tried that out?

it's probably 480i resolution, but i'm afraid that's all you get on an old crt tv.

yes, format the harddisk... then it will work.

i think so.

i prefer fedora, because the sdk was tested on fedora and installation is very smooth.

maybe this helps:
http://linuxonps3.wordpress.com/

fedora also uses yaboot.

jimparis wrote:Try not loading ps3vram, see if that makes a difference?

I have... no difference.
the problem seems to occur very early in the boot phase... right after kboot or petitboot starts the kernel... don't see any boot messages on the screen...

often ps3fb is not working after boot... ps3fb ioc0_01: ps3fb_sync_image: lv1_gpu_context_attribute FB_BLIT failed: -24 ps3fb ioc0_01: ps3fb_sync_image: lv1_gpu_context_attribute FB_BLIT failed: -24 ps3fb ioc0_01: ps3fb_sync_image: lv1_...

....

never mind... just found out that petitboot always automatically boots the last boot selection after 3 seconds or so timeout :-)

... is pretty nifty... however, i haven't found a way to define a default boot source that automatically boots after a specified timeout... like kboot.
is there a way to do that?
thanks.

haven't had time to test... but hopefully soon... does the controller work with bluetooth yet?

still, i think that there is something wrong with sound...
i'm getting those demsgs:
snd_ps3_verify_dma_stop: DMA ch 0 is not stopped.<6>snd_ps3_verify_dma_stop: DMA ch 0 is not stopped.
and they don't seem to be right :-)

It's my impression that the alsa/sound driver has problems on ps3. i have set the driver to nonblock but it looks like the driver still sometimes locks up. wiritei then continuously returns return code -11 and snd_pcm_wait never indicates that the driver becomes ready again. anybody else seen this p...

jimparis wrote:36?!!! There are only 4, maybe you bought 9 cameras by mistake? :)

They work fine. Just open up e.g. Audacity and tell it to record 4 channels.

well, looks like counting beyond 3 seems a bit difficult for me :-)
thanks.

is ps3vram still working with the latest firmware? I tried it: modprobe mtdblock modprobe ps3vram and get ps3vram: lv1_gpu_memory_allocate failed any help? thanks. please ignore... used the ps3vram contained in the latest 2.6.28 kernel... and it seems to work. i hope :-) Adding 250872k swap on /dev...

is ps3vram still working with the latest firmware?
I tried it:

modprobe mtdblock
modprobe ps3vram

and get

ps3vram: lv1_gpu_memory_allocate failed

any help?
thanks.

now that we have video working... any info on how to make the 36 microphones that are in ps3eye work?
thanks.

everything seems to be fine with the latest 2.6.28 kernel: usb 1-2.4&#58; new high speed USB device using ps3-ehci-driver and address 32 usb 1-2.4&#58; configuration #1 chosen from 1 choice gspca&#58; probing 1415&#58;2000 ov534&#58; sensor is ov7721 ov534&#58; frame_rate&...

thanks a lot.
that's the result when return codes are handled inconsistently ;-)

Are you running 32-bit userspace and 64-bit kernel on PPC? I don't know if that's been tested extensively, looks like you're hitting some problem with the compat_ioctl32 stuff. Have you tried other applications that are known to work on other platforms (e.g. mplayer)? i ran the driver with mplayer ...

input&#58; Sony PLAYSTATION&#40;R&#41;3 Controller as /class/input/input5 sony 0003&#58;054C&#58;0268.0006&#58; input&#58; USB HID v1.11 Joystick &#91;Sony PLAYSTATION&#40;R&#41;3 Controller&#93; on usb-sb_05-2.2/input0 sony&#58; probe of 0003&#58...

Are you running 32-bit userspace and 64-bit kernel on PPC? I don't know if that's been tested extensively, looks like you're hitting some problem with the compat_ioctl32 stuff. Have you tried other applications that are known to work on other platforms (e.g. mplayer)? yes, i'm running 32 bit applic...